Browse Category

Home Improvement

Add Style in Colorless Kitchen

Contrast

Contrast is the perfect way to spice up anything. For example, painting a delicate white flower on the door of grey cabinets is an affordable way to add elegance. For homeowners that want to stick with the crisp, clean lines that modern styles are known for can still add some contrast to the area. Hang some black shelves on a white wall and then add in some straight white lines on the grey cabinets instead of a flower.

These colors may seem boring, but they give the perfect opportunity to include the ideal amount of contrast and style to every cooking area.

Cut back on grey

This color is best used for appliances and storage along the edges of the area instead of accent pieces. Grey Shaker cabinets have never gone out of style, and they coordinate perfectly with any theme. Every cabinet will look great in this color, and then the rest of the area can be decked out in black and white for the perfect color combination. Use contrast and a simple style as before mentioned in combination with this tip to make a room more appealing than ever before.

Add some color

Whether a lack of color is all the rave now or not, if it makes a homeowner want to avoid cooking in their own home due to the cold, calculating feel that it gives off, it’s best to forget about the trends and add some color. Hang up some interesting wall art, include a few different accent pieces and pick up a fun rug to put down on the floor; whatever it takes to help a home showcase the personality of the homeowners.

Famous decorators recommend using red and orange for adding warmth; brighter, fun colors like yellow and purple add energy, and shades of tan can be used to help colors blend together.

Trends are always fun, and they can be a great way to get the creative spark going in homeowners that are searching for redecorating ideas. On the other hand, trends can also lead to homeowners being full of redecorating remorse. These stylish tips will help transform a homeowner that is full of remorse into a homeowner that loves the area that they live in, and cook in, once again as they slowly make it showcase their wonderful personality.

Effects of Water Damage

In each event water and cellulose, alongside pervasive mold in our built surroundings, will join to make a mold. Mold is the consequence of water drainage or discharges into unintended spaces. In all occasions, until the point that the source of the water is remediated, any attempts to repair the subsequent harm are vain. The mix of drying, utilization of medicines and controlled decimation are vital to the determination of water damage losses.

Water harm/ damage is an issue that most property owners fear. When it rains intensified or snow dissolves rapidly, the danger of this kind of harm increments. Water can cause thousands of dollars worth of harming wood furniture, upholstery, gadgets, family unit machines, and pipe hardware. Water harm additionally builds the danger of mold development, which is an extremely costly issue to remediate.

Contracting a water harm reclamation organization can influence the cleanup to process less demanding to deal with, as these organizations utilize experienced laborers who know ideal approaches to repair or supplant harmed things and help with water harm cleanup.

Cause of water damage: There are a few conceivable reasons for water harm. Defective dishwashers, clogged toilets, broken funnels, broken dishwasher hoses, flooding clothes washers, flawed rooftops, plumbing holes, and establishment splits are quite recently a portion of the conceivable reasons for water harm in homes and organizations. Surges, overwhelming snow, and substantial rain are other conceivable reasons for this kind of harm and can prompt having water in the basement.

An excessive amount of water can prompt minor issues, for example, water in cellar ranges, or it can prompt the devastation of homes and organizations. Once a home or business maintains water harm, it is imperative to begin the water harm clean up quickly. Beginning water harm cleans up as quickly as time permits improved the probability of spring water-drenched furniture, rugs, carpets, attire, and different things.

Catagories of water damage: Evaluating the seriousness of the damage is imperative for figuring out what is expected to begin water harm repair and water expulsion. There are a few unique classifications doled out to water harm. Class 1 alludes to clean water, or water that does not represent a danger to people. Conceivable reasons for this kind of harm incorporate broken apparatuses or sink floods. Class 2 waters are additionally called gray water. This implies the water is tainted and may cause disorder of ingested. This kind of water contains microorganisms. Broken toilets, broken sump pumps, and drainage may cause class 2 water harm.

Classification 3 is known as dark/ black water. This kind is unsanitary, as it contains microbes and different life forms that reason ailment. The conceivable source of dark water damage incorporates sewage issues and tainting of standing water.
There are additionally a few classes of damage. The class of harm is imperative while surveying water harm repair alternatives. Class 1 is the minimum unsafe type of harm. Materials ingest almost no water from this kind of harm. Water harm repair is the most effortless in this sort of circumstance. Class 2 has a quick rate of dissipation, which implies that floor coverings and pads might be harmed.

Water damage repair is more troublesome when it includes class 2 harm. Class 3 has the quickest rate of evaporation. For this situation, the water may originate from broken sprinklers or other overhead sources, drenching the dividers and furniture. Class 4 requires special reclamation and water expulsion methods. This sort of harm may influence hardwood floors, mortar, and cement.

Restoration procedure: The reclamation process is an essential one. Utilizing the correct methodology and materials can enable individuals to spare cherished possessions and even keep their homes from being condemned. Restoration organizations represent considerable authority in moderating the impacts of water, yet the accomplishment for water damage reclamation relies upon the seriousness of the harm and the measure of water that caused the harm.

Restoration organizations may enlist outside specialists to survey a property and decide a reclamation and water removal design. These restoration organizations normally utilize cutting edge hardware and very much reported systems to control water damage. Water in basement regions may just require a short cleanup process, yet in different territories of a property will require broad remediation.

Benefits of Smart LEDs

  • Low Carbon Emission: One of the biggest contributors to the carbon emission in the environment is the home lighting systems. This impact can be completely negated by switching to use smart LED lights, which emit almost negligible carbon into the atmosphere. The incandescent bulbs create as much as 4,500 lbs. of CO2 per year and CFLs create a little less 1,051 lbs. of carbon emissions per year whereas the smart LED lights only create 451 lbs. of CO2 per year. The difference is vast in nature. It was found in a study, that replacing only one light bulb in every house with an LED bulb would reduce greenhouse gas emissions by 9 billion pounds.
  • Chemical free disposal: The smart LED lights are not only eco-friendly as far as usage is concerned, but also when it comes to disposal of the bulb. The LED lights do not emit any nuclear or Sulfur dioxide waste and neither do they contain any toxic mercury like the fluorescent bulbs, therefore, their disposal has no impact on landfill. Disposal of LEDs is safer on the environment.
  • Cold Temperature Operation: LEDs love to remain cool, unlike its other counterparts which tend to heat up on consumption of energy. For the same reason, these smart LEDs don’t release any heat into the environment and contributes to curbing global warming. No extra energy is wasted in the heating process.
  • No emission of Ultra-Violet rays: Unlike other traditional lamps, these smart LED lamps do not emit any Ultraviolet rays. This makes it a healthier as well as safer source of lighting. They do not produce any infra-red lights, making them suitable for use in places where there are highly heat sensitive materials.

While you may ask that the normal LED bulbs come with the same set of attributes and what is the point of investing in smart LEDs? Smart LED bulbs come with a control system, which gives you an option of either turning in off when not in use with the help of a timer or to make it dim when you do not need full light. So, you won’t be wasting any extra energy when not required. They can also be used in conjunction with motion sensors for outdoor lighting so they turn on or off only when someone walks through. This ensures availability of light when required and saving when not.

These LEDs are eco-friendly and hence can be easily made in use by as many organizations, schools, hospitals etc. The only concern why this has not been achieved yet is the expensive price tag that may be intimidating at the outset.

Only if we look at this price as an investment, as one LED lasts way longer than the traditional bulbs, we would readily be able to make the switch towards a safer environment.

Removing Old Aluminum Windows

Many sliding windows have rollers on the top as well as the bottom. The top rollers don’t actually do anything, they are there more as spares to replace the bottom rollers when they wear out. But many times the window installer will adjust these top rollers to prevent anyone from lifting out the panel. If this is the case with your windows, there will be a screw at the top of each side rail. If you loosen these screws, then lift up on the panel, it should come out. Another obstacle involves a little piece of rubber that the manufacturer places in the top track. This rubber piece has the same effect as adjusting the top rollers. It prevents you from lifting out the panel because it’s wedged between the top of the window panel and the top of the upper track. If you can see that the window panel isn’t lifting all the way up in the top track, and the top rollers are not the reason, then you have to dig out that rubber piece. It’s usually at the point in the center, where the sliding panel and fixed panel overlap when the window is closed. Reach in there with a long, thin screwdriver, and try to pry it out.

Once you have the slider out, take out the screen. You can just pull it out. No need to be gentle since you’re throwing it away anyway. The last step is the fixed panel removal. There are a few different applications here. All of them will have a center vertical bar. It’s usually there to accept the locking mechanism on the slider, but not always. Look for screws holding this center bar in place. They will either be on the outside top and bottom, or you might find them on the side channel where the screen would go. Check the top and bottom corners.

Assuming you found the screws and removed them, you now need to take the center bar off. Take a screw driver and a hammer and tap the center bar at the very bottom. Tap it off the fixed panel frame. Now, pull the fixed panel away from the side where it rests in the side channel. What you are trying to do is slide the fixed panel open the same way that you did the sliding panel. Then, you can lift the fixed panel up and out. Sometimes, the fixed panel won’t want to slide open because it has gotten stuck in the side track. You can put a screw driver into the side channel and pry the fixed panel away from the side. It doesn’t matter if you bend the frame that’s still attached to the house, because we are going to hide all of that anyway.

Now, let’s go back to the vertical center bar and assume you didn’t find any screws to remove it. That means the fixed piece of glass doesn’t have a frame around it. It’s glazed in with either silicone, caulk, or double foam tape. You have to take out the glass, then cut the center bar out using a reciprocating saw. Usually, there will be “stops” on the outside to help keep the fixed piece of glass in place. There will be 4 of them, one on top, bottom, and each side. You should be able to just pry them out with a screw driver. Then, you can go inside and cut away the adhesive holding the glass in the frame. Use a utility knife and cut between the glass and frame. Wear gloves, and be careful not to put your hand through the glass. Put a sheet or tarp outside and let the glass fall into it. You could also have a helper stand on a ladder above the glass and try grabbing the top edge as you cut it away from the frame. Have your helper also wear gloves. The reason for the ladder is that you want to be above the glass in case it has a little crack that you can’t see. As soon as you grab the glass, the crack will run across to the opposite edge, and suddenly you will find yourself trying to hold multiple pieces of glass at the same time. Being on the ladder, if the glass “runs”, you let go. After the glass is out, cut the bottom portion of the center bar flush with the bottom track. Then, you can wiggle the bar back and forth to break the top screw free. You can apply this removal process to picture windows that have no sliding panel. Just treat it like you did the fixed portion, without having to remove a center bar.

Effective Small Bedroom Configurations

  • Start with the Bed- As it will define the entire configuration. Bear in mind the profile of the room before shopping beds. Avoid plain styles as they serve a meager purpose. Look for a versatile bed which can overcome space limitations. Murphy beds, Trundle beds, and Bunk beds are the prominent space savers.
  • Murphy beds are second to none in terms of utility. They can be arranged vertically or horizontally depending on the dimensions of the room. On the flip side, it requires the restructuring of the wall.
  • Trundle beds feature a pull out drawer beneath the bed where one can place blankets or bed sheets. You have to be a bit careful regarding the wall clearance.
  • Bunk beds are ideal for limited spaces. They come in different sizes and designs. Functional Bunk beds are taking center stage in many contemporary bedrooms. They add value to space.
  • If you are a Bookworm, then look for a Bookshelf that fits behind the bed. It would mimic a headboard with a bookcase. It occupies 10 to 12 inches of the space. If you have a low clearance space behind the bed, then look for a bed which features Bookshelves at the foot end of the bed. Even small crates of the shelve can be filled with blankets.
  • Choose Nightstands that occupies minuscule space. A narrow and tall Nightstand offers more storage space compared to normal ones. The saved space can be used to place a reading chair.
  • As every inch in the small bedroom matters, don’t leave the space beneath the dresser empty. You can place storage baskets or catchall baskets.
  • Why go for a Vanity set if you have a Chest of Drawers? Add a mirror to the wall to which the dresser is placed against it. It’s a simple creation with a great value.
  • If you want space to decorate the bedroom, then look for a Wall mounted Shelve that can showcase your prized possessions.

Declutter the bedroom by organizing things. Though it takes time, it will reward you in a good way.

Window Treatment Basics

Privacy protection

Privacy is obviously important, especially for windows in the front of your home that probably face a street or other public throughway’s. Windows facing more private areas of a fenced yard, on the other hand might not need to provide much in the way of privacy.

Several window treatment designs can provide privacy. Blinds or thick curtains most notably, but privacy can also be attained with use of window frostings or diffusers. These will however obstruct your view of the great outdoors.

Light control

Sunlight and glare needs to be controlled in the bedroom if sleeping comfort is interrupted by light entering through the windows. In a room where sunlight will interfere with TV watching or computer use needs window treatments that are effective in light control too.

Any room with items that can be damaged by the suns UV rays need window treatments that are good at controlling light. Any kind of artwork, antiques, or photographs can benefit from this protection. Even carpeting and hardwood flooring can be damaged by the suns UV rays. Consider this when deciding on a window treatment type for any particular window.

Window tinting can be very effective at blocking UV rays. Other than that, window treatments that open and close easily are preferred – blinds, curtains etc. excel here.

Complementing the rooms decor

The decor of window treatments in any given room is more important to some of us than to others. If decor is not an issue for you, then some simple window blinds are inexpensive and effective at the other two criteria.

If decor is more important to you, then you can have your work cut out for you depending on taste. Curtains are available in almost any pattern and color of material. A little sewing experience can make a DIY curtain project a breeze, or perhaps you know someone who is willing to sew curtains to your specifications, using our preferred material.

Benefits Of Sliding Screen Doors

Technically, a sliding screen door refers to a hinged door that covers a home’s exterior door or used as a divider from the patio area. It is made of steel frames and panels as well as neatly woven screen mesh used to keep insects in getting insider the house.

Aside from protection against flying insects that cause certain diseases, other benefits of the doors include:

  • Unique and classy appearance in your home. Today, more and more architectural designs involve the doors because its unique design can give the house a more sophisticated look.
  • A modern look that can suit your own taste when it comes to exterior designs. Since almost all establishments use the doors, your house can be included among those who are considered as “modern houses” if you have installed the doors.
  • It can brighten up the interior of your house because it brings natural light. This is very beneficial because you don’t have to install any artificial lighting inside your home.
  • Aside from beatifying your house using available light, the doors can also help you save some money because you don’t need additional lighting in your house that will consume electricity.
  • It can improve the air circulation inside your house. Because of the slits in the mesh, air can circulate from the outside to provide you home proper ventilation.
  • It minimizes the heat trapped inside the house especially during summer or when you are cooking. Because of the mesh incorporated in most doors, heat can be minimized because it will be absorbed by the air outside the house.

Choose Clay Pavers

They are considered to be one of the most hard wearing and reliable paving materials out there. Besides this fact though, why should you use them? You should use them because they have the following characteristics:

  • Beauty: Because they are made of natural products and are fired in the kiln to set, they have got an appearance that only nature can produce. Clay pavers are also made out of shales, which, when combined with other stones, can really work to bring out the Earth tones.
  • Strength: There is nothing that is equivalent to the strength of clay pavers. These are by far the best stones to have on your driveway. They will also maintain their appearance over time much better than any other stone type.
  • Fade resistant: Many people fear that the stones that they put on their driveways will fade in the sun. Clay pavers do not fade or lose their colour over time.
  • Low maintenance: Perhaps one of their best features is the fact that these stones are so easy to clean and maintain, which makes garden and outdoor care a breeze.
  • Safety: Clay pavers are the best choice for your driveway because they are so safe. They are completely slip-proof! This is a must-have, especially if you have young children who like to play outside.
  • Sleek look: The pavers tessallate easily, so they have got a great, well-finished look when they are laid down. You can make sure that you get nothing but the best looking driveway with these pavers.

Building a Fireplace

The first element is the type of fire itself.

The consideration of wood or gas is most relevant at the final stage – the lighting of the fire. With an actual wood fire you will never lack the sound of a wood fire crackling and glow of real embers. The alternative is a gas insert. There are many new and different designs for gas flames as well models of inserts themselves.

The second element for consideration is the facing on the structure.

This is where there are the most trends, even regionally. Traditionally, brick has been the first choice among homeowners. With the advent of manufactured stone, the cost and availability has made it a popular choice. A coat of stucco has always been popular in the southwest regions. We even see a modern trend of poured concrete or even fabricated metals in very contemporary structures.

The third element is choice of mantle.

This is where the fun really starts. How much mixing and matching are you comfortable with? Something to keep in mind is balance and proportion. Mixing materials and even styles is smart and sexy, just make sure your mantle doesn’t outweigh your fireplace or the opposite.

The fourth element is the hearth.

Functionality can be a consideration when choosing materials for the hearth of a fireplace. A plus is that it will capture heat from the fire and release radiant heat for some time after the fire is out. Will it also provide for extra seating if it is long and wide enough? Additionally, will clean-up be an issue if you are burning real wood and have wood residue and ash?

The fifth element is add-ons.

These can include a wood box, shelving for books, a niche for art or for components like TV’s and audio/video equipment. Wherever these add-ons may be incorporated within your design, remember the heat that your fireplace can produce.

Installing Exterior Door

The biggest reason this is a simple operation is that these doors come prehung. What this means is the door is already hung in its jamb. The hinges are mortised into the door and jamb and screwed in place. The door is held in position by the hinge pins, leaving the perfect reveal around the door and the jambs top and sides. The holes are also bored for the lockset and if necessary, for the deadbolt too. Exterior doors come in wood, fiberglass, and the most popular, steel. The two sizes are normally used for exterior doors are 32″ and 36″. With the sizes of today’s furniture and appliances the smart choice is the 36″ door. The standard height for a door is 6’8″ but taller ones can be special ordered.

The exterior trim comes nailed to the jamb. This trim, called brickmoulding, is mitred and already installed, saving the installer(s) another step. These doors also have an aluminum threshold already attached to the legs of the jambs. All these things make the door and jamb one cohesive unit.

The standard jamb size is 4 and 1/2 inches wide. With the demand for a higher insulation R value in exterior walls, 2×6 framing is being used more frequently. Jambs to fit these walls, 6 1/2 inches, are becoming more common. Jamb widths can be made to order for whatever a projects needs are and would cost more.

To install an exterior door, first check to see if the rough opening is correct. The width of the opening should be 2″ wider than the door itself (38″ for a 36″ door, 34″ for a 32″ door). For a rough opening height 83″ will suffice for most door manufacturers. Also check to see if the framing and floor is reasonably plumb.

Door installation is easier with 2 people but can be done alone. Put the door in the opening from the outside. If you are working alone, tack the door to the wall through the brickmoulding, not driving the nails home. I like to use galvenized ring shank splitless nails that are used for cedar siding. They don’t split the wood and the smaller heads are not as obvious to the eye. The ring shank feature gives them great holding power.

With the door tacked in the opening, go to the inside of the door and check the reveals around the door. There should be about an eighth of an inch all around the door. Shim the jambs of the door so the reveals are right. Check the door jamb on the hinge side for plumb. If it is not plumb, then the floor is out of level. One jamb leg or the other will need to be shimmed so the threshold is level. Now readjust the reveals by moving the door and jambs sideways in the opening to a point where the reveals are right. Once the door and jamb are in position, shim the jamb at each hinge and at the strike, top and bottom on the strike side. Nail the shims in place by nailing through the jamb, through the shims and into the framing. Check the door swing to see if it opens and closes properly. If all is well, go outside and nail through the brickmould using the splitless nails to nail the door frame to the house.

Most door manufacturers provide long screws that replace some of the shorter screws in the hinges on the jamb. The top hinge is the most important place to use one or two of these screws.
These screws go through the jamb and into the framing and keep the door from sagging over time.

Most doors come with an adjustable threshold. This may have to be adjusted up or down to create an airtight seal.

With the door securely in the opening, it is ready for door hardware installation.